The purpose of a ethernet cable is to connect to the internet.
Second: Materials needed
- Network Cable
- Two RJ 45 jacks
- Cable Pliers
This is the process for creating an ethernet cord:
- Cut your wire to the desired length.
- Strip the blue tubing.
- Untwist colored wires and make them straight.
- Place colors in correct order: Light Orange, Dark Orange, Light Green, Dark Blue, Light Blue, Dark Green, Light Brown, Dark Brown.
- Cut wires evenly.
- Hold jack with clip down, place wires inside. The copper in the jack must be meeting with the copper in the other wires.
- Each wire has its own groove in the jack.
- When finished, stick jack in the pliers and clamp down to PERMINATELY attach it.
- Then redo whole process to other side of cable.
To test it, you plug it into the computer and a ethernet jack and see if you get a connection.
I had a really hard time building mine. It took me 8 dozen times to get it right. Now that i have constructed a correct cord, I would take more time aligning the cords in the correct colors so I only have to do it once.
Some words of encouragement, Don't get frustrated and make sure you put all your effort into getting the colors in the correct order.